Xenopixel/Xeno v2 Pixel & LGT Xenopixel

The Eco Xenopixel electronics feature a LED strip blade capable of complete RGB color change and fixed sound font customization. The Eco Xenopixel also features multiple blade effects, startup, and shutdown animations.

Video Overview

Getting Started

Before booting up your saber, follow the link to our blade installation guide - Blade Installation Guide

Press and hold the LED button to wake the saber from sleep mode. A 'power on' audio clip will play to confirm that the saber is awake. To activate the saber, press the activation button again.

The following table provides a list of commands you can activate using the saber. Eco sabers with lit activation switches will flash every second while held. However, most of our Eco sabers made by LGT do not have an illuminated activation switch. We've provided hold timings and LED flashes to help with this issue.

While the blade is active

Active mode is when your saber blade is lit (the LED is active) and making sound (if enabled).

Control Effect Additional Info
Press Button Blaster Deflect
Hold for 1 LED Flash / 1 Second Melt/Tip Drag Press button again to end effect. (Effect only visible on 37 inch blades)
Hold for and clash Blade Lock-Up Effect persists while button is held
Hold for 2 LED Flashes / 2 Seconds Activate color change As colors change, press button again to lock color
Hold for 4 LED Flashes / 4 Seconds Deactivate saber blade Saber will return to wake state

While the blade is in standby mode

Standby mode is while your saber is on (accepting inputs) but the blade is not active.

Control Effect Additional info
Press Button Activate saber Blade is now active
Hold for 1 LED Flash / 1 Second Volume Adjust Can be set to high, low, and mute
Hold for 2 LED Flashes / 2 Second Blade Effect Can be set to: Steady, Pulse, Rainbow, Unstable, and Fire
Hold for 3 LED Flashes / 3 Seconds Blade Mode Can be set to: Standard, Blaster, Ghost, Broken, Stack, Photon, Warp, Phaser, Scavenger, and Hunter
Hold for 4 LED Flashes / 4 Seconds Font Change Select the next soundfont
Hold for 10 seconds Sleep Mode Saber will sleep automatically if idle for 10 minutes

Still need help? Contact Us Contact Us