TXQ SN-Pixel
The TXQ SN-Pixel electronics feature a multi-colored strip blade LED capable of full RGB color change and fixed sound font customization. The TXQ SN-Pixel also features different blade modes and color profiles for customizing your saber.
Video overview
Getting Started
Before booting up you saber, follow the link to our blade installation guide - Blade Installation Guide
Press and hold LED button to wake saber from sleep mode. A 'power on' audio clip will play to confirm that the saber is awake. To activate saber, press the activation button again.
The following table provides a list of commands you can activate using the saber. TXQ sabers with lit activation switches will flash every second while held. However, some TXQ sabers we carry do not have an illuminated activation switch. To help with this issue, we've provided hold timings along with LED flashes.
While blade is active
Active mode is when your saber blade is lit (the LED is active) and making sound (if enabled).
| Control | Effect | Additional Info |
| Press Button | Blaster Deflect | |
| Hold for 1 LED Flash / 1 Second | Activate Lock-up | Press button once to end lock-up |
| Hold for 2 LED Flashes / 2 Second |
Activate color change | As colors change, press button again to lock color |
| Hold for 3 LED Flashes / 3 Seconds | Toggle Clash Mode | Turn clash effects on or off |
| Hold for 4 LED Flashes / 4 Seconds | Deactivate saber blade | Saber will return to standby mode |
While blade is in standby mode
Standby mode is while your saber is on (accepting inputs) but the blade is not active.
| Control | Effect | Additional info |
| Press Button | Activate saber | Blade is now active |
| Hold for 1 LED Flash / 1 Second | Volume Adjust | Can be set to high, low, and mute |
| Hold for 2 LED Flashes / 2 Second | Activation Effect | Change the 'on' effect when activating the saber |
| Hold for 3 LED Flashes / 3 Seconds | Blade Mode | Can be set to: Stable, Ghost, Cross, Infinity, Wave, Rainbow, Fire |
| Hold for 4 LED Flashes / 4 Seconds | Change Soundfont | Select the next Soundfont |
| Hold for 6 seconds | Sleep Mode | Saber will sleep automatically if idle for 10 minutes |