Legacy Veteran
SABER OPERATION
Activation/Power Down
Remove the kill key located below the activation switch. Once the LED lights and audio cue plays, tap (quick press) the switch to activate the saber.
To power down the saber, simply hold the power led (long press) until the saber turns off.
Saber FX
Fonts feature different effect when you tap the power button while the blade is active.
Changing Soundfonts
While the saber is powered down (kill key still removed), hold the activation button for 1.5 seconds or until the first audio cue plays, then release the button. Your saber is now in the next soundfont and can be activated by a quick press.
Changing Saber Settings
While the saber is powered down (kill key still removed), hold the activation button for 3 seconds or until the second audio cue plays, then release the button. Your saber is now in the settings menu.
There are 4 settings. Each setting accepts a long press (accept current option and move to next setting) and a short press (next option). The settings and options are as follows:
| Optical Frequency (Blade Flicker) |
Setting |
| 1 | No flicker/solid |
| 2 | |
| 3 | Medium flicker |
| 4 | |
| 5 | Fast flicker |
| Swing Sensitivity |
Setting |
| 1 | Low sensitivity |
| 2 | |
| 3 | |
| 4 | |
| 5 | Medium sensitivity |
| 6 | |
| 7 | |
| 8 | |
| 9 | High sensitivity |
| Clash Sensitivity |
Setting |
| 1 | Low sensitivity |
| 2 | |
| 3 | |
| 4 | |
| 5 | Medium sensitivity |
| 6 | |
| 7 | |
| 8 | |
| 9 | High sensitivity |
Saving Settings
Settings are automatically saved once you complete all 4 settings options. Settings will not save if the battery dies or you plug in a charger or kill key while in the settings menu.
Charging
Simply plug the charger into the saber charge port by removing the kill key located below the activation switch. Do not try to remove the battery via the pommel as it is secured internally to the soundboard and chassis.
Troubleshooting
LED is dim, audio is off or shutting down automatically
These issues are generally a response to the battery being low but having enough power to still power on. Simply recharge the saber, and this should resolve these issues.