Legacy Hero (Spark Color 3)

SABER OPERATION

The Hero saber features 2 buttons, for simplicity the button closest to the blade will be referred to as button 1 and the other (furthest) button as button 2.

Activation/Power Down

Remove the kill key located below both buttons. Once the LED lights and audio cue plays, tap (quick press) button 1 to activate the saber.

To power down the saber, simply hold button 1 (long press) until the saber turns off.

Saber FX

While saber is on (blade active) tap button 2 to activate a sound effect. To activate the alternate sound effect, hold button 2 to activate and tap to deactivate.

Change soundfonts

Hero sabers feature 10 (6 on older models) soundfonts and sabertrax which allows you to play music through your saber. To cycle through fonts, press button 2. While the audio cue plays press button 2 again to cycle to the next font. Press button 1 to activate the current font.

Sabertrax will automatically play the first song in the list. Pressing button 2 will cycle to the next song. To exit Sabertrax, press and hold button 2.

Change blade color

Hero sabers feature 9 blade colors that can be changed on the fly. To cycle through the colors, press button 2 then button 1 in quick succession. If done correctly an audio cue will play. Tilt your saber vertically (Y-axis) from 0 to 180 degrees to cycle through the colors. Press the button again to lock in the color.

For older hero models, simply twist the saber as if to turn a doorknob to cycle through blade colors.

Charging

Simply plug the charger into the saber charge port by removing the kill key located below the activation switches. Do not try to remove the battery via the pommel as it is secured internally to the soundboard and chassis.

Saber Editor

To edit the soundfonts, volume, blade effects, and other options, Hero sabers feature an editor that allows you to further customize your saber.