Xeno V3 RGB Premium
The Xeno V3 RGB Premium electronics feature a fully lit blade capable of full RGB color change, 25 customizable sound fonts, and an editable SD card. The Xeno V3 RGB Premium also features 3 different blade modes for customizing your saber effects.
Video Overview
Getting Started
Before booting up your saber, follow the link to our blade installation guide - Blade Installation Guide
Press and hold the LED button to wake the saber from sleep mode. A 'power on' audio clip will play to confirm that the saber is awake. To activate the saber, press the activation button again.
The following table provides a list of commands you can activate using the saber. Sabers with lit activation switches will flash every second while held. However, some Eco sabers do not have an illuminated activation switch. To help with this issue, we've provided hold timings along with LED flashes.
While the blade is active
Active mode is when your saber blade is lit (the LED is active) and making sound (if enabled).
| Control | Effect | Additional Info |
| Press Button | Blaster Deflect | |
| Hold for 1 LED Flash / 1 Second | Lock-Up | Press button once to end lock-up |
| Hold for 2 LED Flashes / 2 Second | Activate color change | As colors change, press the button again to lock the color |
| Hold button, tilt saber down and twist counter-clockwise | Activate quick color change | As colors change, press the button again to lock the color |
| Hold for 4 LED Flashes / 4 Seconds | Deactivate saber blade | Saber will return to standby mode |
While the blade is in standby mode
Standby mode is while your saber is on (accepting inputs) but the blade is not active.
| Control | Effect | Additional Info |
| Press Button | Activate Saber | Saber is now active |
| Hold for 1 LED Flash / 1 Second | Volume Adjust | Low, Medium, High |
| Hold for 2 LED Flashes / 2 Second | Blade Effect | Can be set to: Steady, Unstable, and Pulse |
| Hold for 3 LED Flashes / 3 Seconds | Blade Profile | 1 Optional available |
| Hold for 4 LED Flashes / 4 Seconds | Clash detection | Can be set On or Off |
| Hold for 5 LED Flashes / 5 Seconds | Motion detection | Can be set On or Off |
| Hold for 6 LED Flashes / 6 Seconds | Change Soundfonts | Change to the previous font |