Golden Harvest (Previously Champion)
The Golden Harvest electronics feature a base lit blade single color LED and fixed sound font customization. The Golden Harvest also features different blade modes and color profiles for customizing your saber.
Before booting up you saber, follow the link to our blade installation guide - Blade Installation Guide
While blade is active
Active mode is when your saber blade is lit (the LED is active) and making sound (if enabled).
|Press Button||Blaster deflect|
|Hold for 1 second, twist saber and release button||Force push|
| Hold for 2 seconds, release button and clash saber
||Activate lock-up||Tap button to stop effect|
|Hold button for two seconds, release button while saber blade tip is pointed down||Activate drag|| Tap button to stop effect
|Thrust saber forward in jabbing motion||Activate stab||
|Hold button for 2 seconds, release button and preform Stab||Activate melt||Tap button to stop effect|
|Hold button and Stab||Toggle Power Saving Mode|
|Hold button for 2 seconds, release button, hold button for 2 seconds||Enter effects menu/change blade effects||
To exit effects menu or confirm effects choice, hold button for 2 seconds. Sound will play to confirm selection/menu exit
|Point saber blade downwards, hold button for 2 seconds and release.||Change ignited/standby accent LED profiles (only for sabers with accent LEDs)|| Ignited accents profiles determine how your sabers accent LEDs will behave while in active mode.
Standby accents profiles determine how your sabers accent LEDs will behave while in standby mode.
While blade is in standby mode
Standby mode is while your saber is on (accepting inputs) but the blade is not active.
|Press Button||Activate saber||Blade is now active|
|Point your saber blade up, hold button for 2 seconds and then release the button.||Sound menu/Change sound font||
|Point your saber blade downwards and hold the button for 2 seconds before releasing||Volume control menu/Adjust volume level|| This will activate the volume control menu. Twist saber to adjust volume level. To confirm volume selection and exit volume menu, tap button.
|While Battery level indicator is active, stab saber||Calibrate battery|| For best results only calibrate your battery after fully charging
Your Champion saber arrives with the battery fully calibrated. Calibration helps your saber accurately track your current battery level.
|Hold button for 10 seconds, release when LEDs begin flashing||Reset saber||When your lightsaber resets, the LEDs in your saber blade will begin to flash. Once reset is complete, the LEDs will stop flashing and the boot sound of the last active sound font will play.|
|Point saber blade downwards and hold button. Twist saber.||Saber editor menu|| Editing options changes depending on which tier of saber you have.
To leave saber editor menu, navigate to “Save and leave saber editor” option and hold down button for 2 seconds to confirm selection.
My blade is blinking and does not respond to any button taps. How can I fix that?
My blade looks dim/white blade color looks yellow/is experiencing blade animation errors. How can I fix this?
Please charge your saber. The battery level of your saber can affect the brightness, color, and overall performance of your saber
There is stuttering/choppy/no sound from my saber. How can I fix it?
- Charge your saber
- Reset saber
- Reformat your SD card by following the instructions below:
- Connect your saber to a PC and make a copy of the contents located on your sabers SD card.
- Download the SD card formatting software below for the operating system you are working on:
- Select your SD card and when formatting make sure to use the "quick format" option.
- When reformatting is completed restore the files onto your SD card using the copy you saved to your computer in step 1
If these troubleshooting options do not solve any sound related errors you are experiencing please contact SF customer service for further assistance.