Xeno v3 Pixel Premium

The Xeno v3 Pixel electronics feature a LED strip blade capable of complete RGB color change and fixed sound font customization. The Xeno v3 Pixel also features multiple blade effects, startup, and shutdown animations.

Video Overview

Getting Started

Before booting up your saber, follow the link to our blade installation guide - Blade Installation Guide

Press and hold the LED button to wake the saber from sleep mode. A 'power on' audio clip will play to confirm that the saber is awake. To activate the saber, press the activation button again.

The following table lists commands you can activate using the saber. Xeno v3 Pixel sabers with lit activation switches will flash every second while held. However, some sabers may not have an illuminated activation switch. To help with this issue, we've provided hold timings along with LED flashes.

While the blade is active

Active mode is when your saber blade is lit (the LED is active) and making sound (if enabled).

Control	Effect	Additional Info
Press Button	Blaster Deflect
Hold button and clash saber	Blade Lock Up
Hold button for .5 seconds/1 led flash then release	Drag
Hold for 1 second/2 LED flashes then release	Infinite color change	As colors change, press button again to lock color
Point saber down, hold button and twist saber (counter-clockwise then clockwise)	Standard color change	As colors change, press button again to lock color
Point saber down, hold button and twist saber (clockwise then counter-clockwise)	Twist color change	As colors change, press button again to lock color
Point saber up, hold button and twist saber (clockwise then counter-clockwise)	Force Effect
Thrust saber forward	Stab	Only visible on 37-inch blades
Spin saber quickly	Spin
Hold button and stab hilt	Melt	Twist to change melt color
Hold button until saber turns off	Deactivate

While the blade is in standby mode

Standby mode is while your saber is on (accepting inputs) but the blade is not active.

Control	Effect	Additional info
Press Button	Activate saber	Blade is now active
Hold for 1 LED Flash /.5 Seconds	Volume Adjust
Hold for 2 LED Flashes /1 Second	Change Blade Effect
Hold for 3 LED Flashes /1.5 Seconds	Change Blade Mode
Point saber down and twist (counter-clockwise then clockwise	Select next soundfont
Hold for 4 LED Flashes /2 Seconds	Select previous soundfont
Hold for 10 seconds	Sleep Mode	Saber will sleep automatically if idle for 10 minutes

Switch to RGB Mode

With the blade off, press and hold the power button for 13 seconds. The board will change fonts, "power off", but keep pressing until you reach the menu that allows you to select RGB or Pixel Mode.

When the saber is in RGB mode and a Pixel blade is used, only the lower portion of the Pixel blade will illuminate. For the core to work correctly in RGB mode, the saber requires an RGB adapter, and a Standard blade - Adapter coming soon.